CM6884537102Z - Zinc Anode - for salt water use. Not recommended for fresh water.
688-45371-02 Yamaha Outboard Trim Tab Anode Fits the following Yamaha outboard models:
T50LA, T50LB, T50TLR, T60LA, T60LB, T60TLR, F70LA, F75LA, F75TLR,...

CMC07 - Zinc Anode - for salt water use. Not recommended for fresh water.
Easy installation underwater: Bolt retaining washers prevent the anode from falling off.
• Full shaft contact: 100% circular radius
• Interlocking halves...

CMPNZG - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMMP83RZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Designed for 1-1/2" to 1-3/4" (30 mm to 35 mm) shafts
Height: 2-1/4"
Outside Diameter: 3-1/8"
Dimensions:
Length: 57.15mm (2.250in)
Width: 79....

CM62Y1132500A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 48.26mm (1.900in)
Width: 10.16mm (0.400in)
Depth: 48.26mm (1.900in)
Categories: Outboard Anodes, Engine Cooling System Anode, Martyr...

CMX25 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
Dimensions:
...

CME1G - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMM24 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 17.78mm (0.700in)
Width: 110.74mm (4.360in)
Depth: 17.78mm (0.700in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CMPNZF - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMR05 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 22.35mm (0.880in)
Width: 130.30mm (5.130in)
Depth: 22.35mm (0.880in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr...