SPDT, push-fit design with push on terminals, Dash Light & On illumination. Mounting opening: 37.5 x 21mm.
Amperage rating 20A at 12V only

• Toggle Switch
Key Features:
• Non-corrosive plastic construction
• Brass blade terminals, silver contacts
• Illuminates white when panel light are ON, changed to red when switch is ON
• Lights through tip...

SPDT, push-fit design with push on terminals, Dash Light & On illumination. Mounting opening: 37.5 x 21mm.
Amperage rating 20A at 12V only

Smooth yet powerful SMD L.E.Ds with an in-built Off/On switch. Ultra slim surface mountdesign maximises headroom in enclosed cabin areas.
Smooth yet powerful SMD L.E.Ds with an in-built Off/On switch
Ultra slim surface mount design...

SPST, push-fit design with push on terminals, Dash Light & On illumination. Mounting opening: 37.5 x 21mm.
Amperage rating 20A at 12V and 10A at 24V.
Illuminated panel (red) with symbol

BI-0702 Battery Isolator
Rated for use with 10 to 350 amp alternators on 12, 24, or 32 volt negative ground systems.
NOTE: Battery Isolators cannot be used on 12 volt charging systems 2ith 24 volt trolling motors or newer outboard...

SPST, push-fit design with push on terminals, Dash Light & On illumination. Mounting opening: 37.5 x 21mm.
Amperage rating 20A at 12V and 10A at 24V.

• Toggle Switch
Key Features:
• 10'' L 16 Gauge wire leads
• Plasticized coating seals out moisture and dirt
• Nickel plated brass handle, mounting stem and hardware
• Fits panel up to 3/16'' (4.76mm) thick...

DPDT, push-fit design with push on terminals and On illumination. Mounting opening: 37.5 x 21mm.
Amperage rating 20A at 12V and 10A at 24V.

702-MFH, MAXI Fuse Holder
The Maxi Fuse Holder is an economical way to fuse heavy 30-80A loads. It is ideal for battery charger outputs or mains feeds.

Dimensions (approximate)
L: 70mm
W: 55mm
H: 35mm