• S/S TO 118-7714
Additional Details:
• Barb Size: 5/16"
• Fits: 25 Hp - 90 Hp 4-Stroke Carburettor Outboards 1999 & Newer
Interchange:
Mercury Marine
• 35-877565T
• 35-877565T1

Powerhead Gasket Set, P600245850003 - (Oil Seals Not Included)

Fits: JOHNSON ENVIRUDE, 2 cyl. models only

40 HP - 2 CYL 0 cc 1984/1997
45 HP - 2 CYL 0 cc 1985/1992
48 HP - 2 CYL 0 cc 1987/1997
50 HP - 2 CYL 0 cc...

• UNIV RECTANG CUP MOTOR FLUSHER
Key Features:
• For use on all lower units with side water inlets, including Volvo SX
• Ideal in low-pressure condition often found in marinas
• Improved water flow with rectangular...

• Seal & Bearing Kit
Key Features:
• Greasable
Additional Details:
• Fits: Gen II(1998 & Up) and all Bravo
Interchange:
Mallory
• 9-72425

CM5532194900A - Aluminium Anode - for use in salt and brackish water.
Mounts on bottom of stern bracket.
Fits the following Suzuki outboards:
DF60 - DF300 2001 and later
DT115 - DT140 1996-2001
Dimensions:
Length: 195....

• Serpentine Belt
Additional Details:
• For: V-135/150 DFI (1998-up) and V-175 DFI (2001-up)
Interchange:
Mallory
• 9-55021
Mercury Marine
• 57-8285072
• 57-8285074
• 57-828507Q4...

CMALPHAKITA - Aluminium Anode - for use in salt and brackish water.
Fits 1991 and newer Mercruiser Alpha One Gen II drives
This kit contains:
• CM762145 Mercury/Mercruiser Flat Trim Tab Aluminum Anode
• CM806105 Mercruiser...

6241 Power Trim / Tilt Motor
Fits: O.M.C. 60, 70, 90, 115, 150, 175 HP, 1991-Up 200, 225 HP,
1991-94 120, 140 HP, 1995-UP 50 HP 3-cyl, 60 HP, V4 130 HP
1997-Up 115-200 HP, 1998-99 225 HP
Key Features
• 2-wire...

CM1113094600A - Aluminium Anode - for use in salt and brackish water.
Fits YAMAHA 40HP & UP to 1997 & SUZUKI FB Outboard Motors
Dimensions:
Length: 10.16mm (0.400in)
Width: 22.86mm (0.900in)
Depth: 10.16mm (0.400in)...