16.45" (5 m)
Installation Cable Kit
• 2 core screened cable in 2 lengths pre-terminated

Same features as the 600-GD, with the ability to switch a valve on.
It contains a unique “Pulse & Hold” circuit within the detector.
This allows the valve to be pulled in at 12V and then once energized
it will step down to hold...

600-LPG is a stand alone gas shut-off system with no gas detection ability.
For 12V systems order VR2.2 separately.
For 24V systems order VR2.2-24V.
Gas Detectors
The BEP Detectors use microprocessor control to ensure correct...

Tank Sender for 600-TG
• Well nut hole size 3/8" (9 mm)
• Cable length 5 m
• One kit supplied with 600-TG

Tank Sender Interface Module
• Only required when using VDO (10-180) or Centroid (10-180) or
Teleflex (240-33) senders to produce a 0–5V signal for either the
DCSM, or ACSM systems monitors.
• Switchable link for VDO or Teleflex...

Current Transformer
• Maximum current 150A AC
• One CT-10-3 current transformer is supplied with ACSM. If a twin
line system is in use, a second CT must be ordered.
• Dimensions: 1.5" x 1.55" x .55" (37.5 x 39.2 x 13.7 mm)...

Heavy-duty Current Transformer
• Maximum current 150A AC
• CT-HD is available for systems with large mains cables, too large
for CT-10-3 (ordered separately).
• CT-HD dimensions: Ø 1.85 x 0.4" (Ø 47 x 10.5 mm)
• Hole size: 1...

FD-2 is designed for an economic in-dash installation.
Supplied with sensor (5 m cable) which is capable of detecting
combustible gases.
Gas Detectors
The BEP Detectors use microprocessor control to ensure correct sensor
...

DC Systems Monitor
Contour Interior 1000 Series Switch Panels
The smart, economical interior option for smaller vessels. Fully
modular and built with ease of access in mind.
• Removable frame conceals mounting screws
•...

Ammeter Shunt Enclosure
Provides a protective housing for shunt termination meeting ABYC standards.
DC current shunt Part # LB-450-50M ordered separately.
• Digital large: 450A - 50mV
• Analog small: 50A - 50mV, 100A - 50mV,150A...