CM280KITA - Aluminium Anode - for use in salt and brackish water.
Fits Volvo Penta 280 model outdrives
This kit contains:
• CMV18A prop shaft ring anode
• CM832598A transom plate anode
• Kit includes all fastening...

CM55989A - Aluminium Anode - for use in salt and brackish water.
Attaches to the Alpha One gimbal housing's mounting bolts.
Also used by Key Power KP08 and KP10 bow thrusters (KP12-A-005).
Dimensions:
Length: 30.48mm (1.200in)...

CM290EUKITA - Aluminium Anode - for use in salt and brackish water.
Fits Volvo Penta 290 Engines
This kit contains:
• CMV18 X 1
• CM852835 X 1
• CM872793 X 2
Dimensions:
Length: 430.02mm (16.930in)
...

CMALPHAGEN1KITZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits Alpha I Generation I Engine 1983-1990 Mercruiser MR & Alpha One drives
This kit contains:
• 31640 Mercury/Mercruiser Standard Trim...

CM806105KITA - Aluminium Anode - for use in salt and brackish water.
Fits Alpha One Generation Two sterndrives, located behind propeller.
This kit contains:
• CM806105 X 1
• Mounting Hardware
Aluminum aftermarket...

CM31640M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water. 
Fits most Mercury/Mariner outboards 35 hp and above & Mercruiser Alpha One sterndrives.
Dimensions:
Length: 83.82mm (3.300in)
...

CM589350A - Aluminium Anode - for use in salt and brackish water.
For Lewmar thrusters with a 185mm tunnel diameter.
Dimensions:
Length: 15.24mm (0.600in)
Width: 45.72mm (1.800in)
Depth: 15.24mm (0.600in)
Categories:...

CM327606A - Aluminium Anode - for use in salt and brackish water.
Fits Johnson 2 - 150HP Outboards
Dimensions:
Length: 60.96mm (2.400in)
Width: 22.86mm (0.900in)
Depth: 12.70mm (0.500in)
Categories: Outboard Anodes,...

CMMP70MZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 44.96mm (1.770in)
Width: 71.88mm (2.830in)
Depth: 44.96mm (1.770in)
Categories: Propeller / Shaft Anodes, Propeller Anode,...

CM806190KITA - Aluminium Anode - for use in salt and brackish water.
Fits: Bravo 1, 2, 3 and Blackhawk Sterndrive Lift-Trim Cylinder Rams
This kit contains:
• CM806190 X 1
• Mounting Hardware
Replaces Mercury Part:...