CMX13 - Zinc Anode - for salt water use. Not recommended for fresh water.
The world’s best shaft anode design:
• Fit & longevity
• Easy installation underwater
• Bolt retaining washers prevent the anode from falling off
...

CMC07 - Zinc Anode - for salt water use. Not recommended for fresh water.
Easy installation underwater: Bolt retaining washers prevent the anode from falling off.
• Full shaft contact: 100% circular radius
• Interlocking halves...

CME1G - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CM6H14525102Z - Zinc Anode - for salt water use. Not recommended for fresh water.
YAMAHA 6H1-45251-02 60 - 70 - 75 - 80 - 90 -100 HP
Dimensions:
Length: 203.20mm (8.000in)
Width: 35.56mm (1.400in)
Depth: 17.78mm (0.700in)...

CMSZ90140KITA - Aluminium Anode - for use in salt and brackish water.
Fits Suzuki Outboards 90-100-115-140HP Outboards
This kit contains:
• CM5532190J01 X 1
• CM5532187J00 X 4
• CM3C7602181A0 X 1
Dimensions:...

CMSGSL565A - Aluminium Anode - for use in salt and brackish water.
SGSL565A Sleipner Side-Power 71190/51180 replacement Aluminium Anode for Bow Thrusters

44mm Outside diameter
20mm Height
6mm Bolt hole
20mm Hex...

CMX05A - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 62.23mm (2.450in)
Width: 68.07mm (2.680in)
Depth: 62.23mm (2.450in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr...

CMPNZG - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMMP83RZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Designed for 1-1/2" to 1-3/4" (30 mm to 35 mm) shafts
Height: 2-1/4"
Outside Diameter: 3-1/8"
Dimensions:
Length: 57.15mm (2.250in)
Width: 79....

CM393023A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 40.64mm (1.600in)
Width: 25.40mm (1.000in)
Depth: 40.64mm (1.600in)
Categories: Outboard Anodes, Block Anode, Wedge Anode, Martyr Anodes,...