CMX00 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining...

CMPNZA - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to...

CMSGVT240A - Aluminium Anode - for use in salt and brackish water.

CM5532194900A - Aluminium Anode - for use in salt and brackish water.
Mounts on bottom of stern bracket.
Fits the following Suzuki outboards:
DF60 - DF300 2001 and later
DT115 - DT140 1996-2001
Dimensions:
Length: 195....

CMX05AL - Aluminium Anode - for use in salt and brackish water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers...

CM5532194900Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Mounts on bottom of stern bracket.
Fits the following Suzuki outboards:
DF60 - DF300 2001 and later
DT115 - DT140 1996-2001
Dimensions:
...

CMR01M - Magnesium Anode - for fresh water only. Not recommended for salt or brackish water.
Dimensions:
Length: 8.89mm (0.350in)
Width: 47.75mm (1.880in)
Depth: 8.89mm (0.350in)
Categories: Rudder / Trim Tab Anodes, Rudder...

CM589150Z - Zinc Anode - for salt water use. Not recommended for fresh water.
For Lewmar thrusters with a 140mm tunnel diameter.
Dimensions:
Length: 15.24mm (0.600in)
Width: 38.10mm (1.500in)
Depth: 15.24mm (0.600in)
...

CM327606Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits Johnson 2 - 150HP Outboards
Dimensions:
Length: 60.96mm (2.400in)
Width: 22.86mm (0.900in)
Depth: 12.70mm (0.500in)
Categories: Outboard...

CMSGHA643A - Aluminium Anode - for use in salt and brackish water.

Used on HJ273, HJ274, HJ291, HJ292, HJ321, HJ322, HJ362, HS363, HJ402, HM422 and other Hamilton jet drives.