CMSGSL565A - Aluminium Anode - for use in salt and brackish water.
SGSL565A Sleipner Side-Power 71190/51180 replacement Aluminium Anode for Bow Thrusters

44mm Outside diameter
20mm Height
6mm Bolt hole
20mm Hex...

CMEZ3 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 63.50mm (2.500in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)

CM6E51132500A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 27.94mm (1.100in)
Width: 10.16mm (0.400in)
Depth: 10.16mm (0.400in)
Categories: Outboard Anodes, Block Anode, Wedge Anode, Martyr...

CMZHC3AZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 158.75mm (6.250in)
Width: 69.85mm (2.750in)
Depth: 19.05mm (0.750in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CME3 - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an...

CMZHC5AZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 203.20mm (8.000in)
Width: 101.60mm (4.000in)
Depth: 19.30mm (0.760in)
Categories: Hull Anodes, Streamlined Anode, Martyr Anodes

CMX05 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining...

CM6E54537101A - Aluminium Anode - for use in salt and brackish water.
Fits the following Yamaha outboard models:
F115 & VF115 - all models
115 HP 2-Stroke - all models
130 HP 2-Stroke - all models
150ETL
150ETX...

CMR01 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 8.89mm (0.350in)
Width: 47.75mm (1.880in)
Depth: 8.89mm (0.350in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr...

CM762145A - Aluminium Anode - for use in salt and brackish water.
Fits Alpha I Generation II Engine, Bravo I, Bravo II, Bravo III, Verado 4, 6
Dimensions:
Length: 91.44mm (3.600in)
Width: 91.44mm (3.600in)
Depth: 22.86mm (0....