Propprep is a critical step in the chemical preparation of the metal surface for Propspeed.
Propprep is available in a box of 10 Propprep wipes, for applicator convenience.
1 Propprep wipe will clean a propeller of approximately 33-66cm, or 13-24", in size.Read more...

Propclean is the first step in the Propspeed application process.
Propclean is available in a box of 10 Propclean wipes, for applicator convenience. The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep.
1 Propclean wipe will clean a propeller of approximately 33-66cm, or 13-24", in size.Read more...

Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30 minutes or less (subject to atmospheric conditions). The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free.

Coverage Guide:
• 1L / 0.26 gal = 2m2 / 21.5ft2 coverage

Suitable for use on:
All metal surfaces where Propspeed, or similar running gear coatings, have been applied.

DO NOT USE ON:
• Foulfree™
• Hull
• Transducers
• Underwater lights
• Lightspeed™
• Powder coatRead more...

Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products.

In the kit:
1. Lightclean Wipe
Lightclean has been specially formulated to remove impurities, grease and contaminants from the light surface. The Lightclean solution comes pre-packaged with a wipe to make your job easier.

2. Application Brush
A small, high quality brush is included to provide the best result during the application of the Lightspeed coating.

3. Clear Coat
This kit contains 15ml of Lightspeed Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, keeping your lights shinning bright, all season long!

Coverage Guide:
• Coverage rate for a 15ml kit: 1ft² / 0.1 m²Read more...

Formulated by industry-leading scientists and certified by Airmar for transducers, Foulfree is a clear, foul-release coating for transducers. Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns, and positive fish targets. Foulfree keeps transducers clean and operating at the top of their game for the clearest sonar images possible.

In the kit:
1. Abrasive Pad
The abrasive pad is used to prepare the transducer face and housing for the Foulfree transducer coating.

2. XDClean
XDclean is a transducer safe, pre-treatment cleaner. Having a clean transducer is critical to maximise the performance of Foulfree. The XDclean solution comes pre-packaged with a wipe to make cleaning easy.

3. XDPrime
XDprime is an adhesion promoter for all transducer faces, providing an especially strong bond to plastic. The XDprime solution comes pre-packaging with a wipe to make conditioning easy.

4. Application Brush
A small, high quality brush is included to provide the best result during the application of the Foulfree coating.

5. Clear Coat
This kit contains 15ml of Foulfree Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, keeping your transducer performing at its peak.

Coverage Guide:
• One 15ml kit will coat 1ft2 (0.1 m²)Read more...

Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

In the kit:
1. Propclean
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with a wipe to make your job easier.

2. Propprep
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier.

3a&b. Etching Primer Base & Hardener
This kit contains 96ml Etching Primer Base and 24ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.

4. Clear Coat
This kit contains 80ml Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.

Coverage Guide:
or 1 x Propeller

Coverage Guide:
1 x Propeller
• 33-60cm, or 12-24" in size.

Surface
• The Propspeed Small Kit will coat a surface of approximately 0.7m2 / 7.5ft2Read more...

Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.

The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.

In the kit:
1. Propclean
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with a wipe to make your job easier.

2. Propprep
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier.

3a&b. Etching Primer Base & Hardener
This kit contains 96ml Etching Primer Base and 24ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.

4. Clear Coat
This kit contains 80ml Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.

Coverage Guide:
1 x Propeller
• 66-96.5cm, or 26-38" in size.

2 x Propellers
• 36-76cm, or 13-30", in size.

Surface
• The Propspeed Medium Kit will coat a surface of 1.7m2 / 18.3ft2.Read more...