Browse our extensive range of high quality marine products at Promt Parts

CMR04

ZINC RUDDER ANODE (5" trim-tab disc anode)

CMR04 - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 16.51mm (0.650in)
Width: 127.00mm (5.000in)
Depth: 16.51mm (0.650in)
Categories: Rudder / Trim Tab Anodes, Rudder Anodes, Martyr AnodesRead more...

$86.96 (excl GST)

Stock Qty: 5+

Rudder & Trim Tab Anodes (pdf)

CME1G

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 1)

CME1G - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 44.45mm (1.750in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)Read more...

$24.59 (excl GST)

Stock Qty: 5+

CMX05

Zinc Streamlined Shaft Anode Cmx-5 (1-1/4")

CMX05 - Zinc Anode - for salt water use. Not recommended for fresh water.
• Interlocking halves
• Full shaft contact (100% circular radius)
• Extra alloy around the fastener
• Easy installation underwater
• Bolt retaining washers prevent anode from falling off.
Dimensions:
Length: 59.69mm (2.350in)
Width: 61.47mm (2.420in)
Depth: 59.69mm (2.350in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

$41 (excl GST)

Stock Qty: 5+

CMZHC3AZ

ZINC Medium Streamlined Bolt-on hull anode ZHC-3

CMZHC3AZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 158.75mm (6.250in)
Width: 69.85mm (2.750in)
Depth: 19.05mm (0.750in)
Categories: Hull Anodes, Streamlined Anode, Martyr AnodesRead more...

$97.5 (excl GST)

Stock Qty: 5+

Hull Anodes (pdf)

CMZHC5AZ

ZINC HULL ANODE ZHC-5 (Large Streamlined Bolt-on hull anode)

CMZHC5AZ - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 203.20mm (8.000in)
Width: 101.60mm (4.000in)
Depth: 19.30mm (0.760in)
Categories: Hull Anodes, Streamlined Anode, Martyr AnodesRead more...

$153.1 (excl GST)

Stock Qty: 5+

Hull Anodes (pdf)

CM272100200300Z

CMSGYN069 YANMAR CM9-1 ZINC LONG ANOD E M8 THREAD

CM9-1 - Zinc Anode - for salt water use. Not recommended for fresh water.

Fits Yanmar marine engines: 2GM(D), 3GM(D), 2GM20, 3GM30, 3HM, 3HM35, 2QM15, 2QM20, 3QM30, YSB8, YSB12, YSM8, YSM12

Length: 30mm
Diameter: 20mm
Threads: M8Read more...

$15.42 (excl GST)

Stock Qty: 5+

CMEZ3

Zinc Engine Cooling System Pencil Anode Replacement (1/2 Unc X 3/4 X 2)

CMEZ3 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 63.50mm (2.500in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)Read more...

$9.91 (excl GST)

Stock Qty: 5+

CM6J94537101Z

ZINC YAMAHA CMY 6J9-45371-01 Trim Tab Skeg Anode

CM6J94537101Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Fits the following Yamaha outboard models:
F150 & VF150 4-Stroke - All Models
F175 4-Stroke - All Models
F200LB, F200XB, F200XCA
150 HP 2-Stroke - All Models 1988 and Newer
175 HP 2-Stroke - All Models 1990 and Newer
200 HP 2-Stroke - All Models 1988 and Newer
225ETLD, 225TLR, 225TXR
Dimensions:
Length: 83.82mm (3.300in)
Width: 101.60mm (4.000in)
Depth: 83.82mm (3.300in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes, Yamaha AnodeRead more...

$46.37 (excl GST)

Stock Qty: 5+

CMEZ0

Zinc Engine Cooling System Pencil Anode Replacement (5/16 Unc X 3/8 X 1-3/4)

CMEZ0 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 57.15mm (2.250in)
Width: 9.65mm (0.380in)
Depth: 0.00mm (0.000in)Read more...

$5.23 (excl GST)

Stock Qty: 5+

CMEZ1

Zinc Engine Cooling System Pencil Anode Replacement (3/8 Unc X 1/2 X 2)

CMEZ1 - Zinc Anode - Replacement pencil anodes thread into your existing pencil anode brass plug(s).
Dimensions:
Length: 63.50mm (2.500in)
Width: 9.65mm (0.380in)
Depth: 0.00mm (0.000in)Read more...

$5.81 (excl GST)

Stock Qty: 5+

CM838929Z

Zinc Volvo Penta Pencil Anode 200-250-270 Series

CM838929Z - Zinc Anode - for salt water use. Not recommended for fresh water.
Dimensions:
Length: 43.18mm (1.700in)
Width: 17.78mm (0.700in)
Depth: 43.18mm (1.700in)
Categories: Sterndrive Anodes, Engine Cooling System Anode, Martyr Anodes, Volvo Penta AnodeRead more...

$10.24 (excl GST)

Stock Qty: 5+

Volvo Penta Anodes (pdf)

CME1E

Zinc Engine Cooling Pencil Anode With Plug (3/8 Npt X 1/2 X 1-1/2)

CME1E - Zinc Anode - Martyr CME series marine anodes consist of a brass plug with an anode threaded into it. These anodes meet or exceed the specification of anodes supplied as original equipment.
Engine cooling system pencil anodes is an application where zinc is the anode material of choice. Engine manufacturers - Cummins, Yanmar, Caterpillar, etc. - still use zinc for pencil anodes.
Dimensions:
Length: 57.15mm (2.250in)
Width: 12.70mm (0.500in)
Depth: 0.00mm (0.000in)Read more...

$18.41 (excl GST)

Stock Qty: 5+

CM272100200200Z

SHORT YANMAR CM9-7 ZINC PENCIL ANODE M8 THREAD

CM9-7 - Zinc Anode - for salt water use. Not recommended for fresh water.

Fits Yanmar marine engines: 1GM, 1GM10, 1GM12, 6LY3-UTP, 6LY3-STP, 6LY3-ETP

Length: 20mm
Diameter: 20mm
Threads: M8Read more...

$26.26 (excl GST)

Stock Qty: 5+

CM6E54537101A

ALUMINIUM YAMAHA CMY 6E5-45371-01 Trim Tab Anode

CM6E54537101A - Aluminium Anode - for use in salt and brackish water.
Fits the following Yamaha outboard models:
F115 & VF115 - all models
115 HP 2-Stroke - all models
130 HP 2-Stroke - all models
150ETL
150ETX
175ETL
175ETX
200ETL
200ETX
Dimensions:
Length: 76.20mm (3.000in)
Width: 91.44mm (3.600in)
Depth: 76.20mm (3.000in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes, Yamaha AnodeRead more...

$45.36 (excl GST)

Stock Qty: 5+

CM6G54525101A

ALUMINIUM YAMAHA CMY 6G5-45251-01 Handlebar Anode

CM6G54525101A - Aluminium Anode - for use in salt and brackish water.
6G5-45251-01 Handlebar Anode Fits the following Yamaha outboard models:
F115 & LF115 4-Stroke - All Models (except JB, LB, XB)
F150 & LF150 4-Stroke - All Models
F200 & LF200 4-Stroke - All Models
F225 & LF225 4-Stroke - All Models
F250 & LF250 4-Stroke - All Models
F300 & LF300 4-Stroke 4.2L V6 - All Models
115TLR
115TXR
130TLR
150TXR
DX150TLR
LX225TXR
LZ150TXR
LZ200TXR
LZ250TUR
LZ250TXR
LZ300TUR
LZ300TXR
SX150TXR
SX200TXR
SX225TUR
SX225TXR
SX250TUR
SX250TXR
V150TLR
VF250XA
VX150TLR
VX225TLR
VZ150TLR
VZ150TLR
VZ175TLR
VZ200TLR
VZ225TLR
VZ250TLR
VZ300TLR
Z150TLR
Z175TXR
Z200TLR
Z200TXR
Z250TUR
Z250TXR
Z300TUR
Z300TXR
Dimensions:
Length: 203.20mm (8.000in)
Width: 45.72mm (1.800in)
Depth: 50.80mm (2.000in)
Categories: Outboard Anodes, Bar Anode, Bracket Anode, Martyr Anodes, Yamaha AnodeRead more...

$43.47 (excl GST)

Stock Qty: 5+

CM804079002A

ALUMINIUM MERCURY Anode D23xH32

CM804079002A - Aluminium Anode - for use in salt and brackish water.
Dimensions:
Length: 55.88mm (2.200in)
Width: 22.86mm (0.900in)
Depth: 33.02mm (1.300in)
Categories: Outboard Anodes, Engine Cooling System Anode, Martyr Anodes, Mercury / MerCruiser AnodeRead more...

$11.26 (excl GST)

Stock Qty: 5+

CM6884537102Z

ZINC YAMAHA Trim Tab Skeg Anode

CM6884537102Z - Zinc Anode - for salt water use. Not recommended for fresh water.
688-45371-02 Yamaha Outboard Trim Tab Anode Fits the following Yamaha outboard models:
T50LA, T50LB, T50TLR, T60LA, T60LB, T60TLR, F70LA, F75LA, F75TLR, F80TJR, F90JA, F90TJR, F90TLR, F90TXR, F90XA, F100TLR, F100TXR
Dimensions:
Length: 76.20mm (3.000in)
Width: 96.52mm (3.800in)
Depth: 76.20mm (3.000in)
Categories: Outboard Anodes, Trim Tab Anode, Martyr Anodes, Yamaha AnodeRead more...

$38.81 (excl GST)

Stock Qty: 5+

CMPNZD

Zinc Propeller Nut Anode D-Replacement

CMPNZD - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to ensure maximum hold.
Dimensions:
Length: 74.93mm (2.950in)
Width: 58.42mm (2.300in)
Depth: 74.93mm (2.950in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

$54.66 (excl GST)

Stock Qty: 5+

CMPNZF

Zinc Propeller Nut Anode F-Replacement

CMPNZF - Zinc Anode - for salt water use. Not recommended for fresh water.
• Fasteners are included with all replacement prop nuts.
• Nylon patch is good for one initial application only.
• Please use lock tite or teflon tape to ensure maximum hold.
Dimensions:
Length: 84.33mm (3.320in)
Width: 69.85mm (2.750in)
Depth: 84.33mm (3.320in)
Categories: Propeller / Shaft Anodes, Propeller Anode, Martyr AnodesRead more...

$73.91 (excl GST)

Stock Qty: 5+